Flange Spreaders replace flange gaskets safely and easily without hammering. Flange spreaders are attached to flange hole and its wedge action opens the gap, after replacing the gasket, flanges will finally resume their exact positions. It is always used in pairs.

Operations
  1. Remove two diametrically opposite flange bolts
  2. Place spreader jaws into free bolt holes and tighten the screws until spreader are in upheld position
  3. Remove remaining flange bolts
  4. Tighten bolt screws simultaneously to widen gap evenly, permitting easy work between flanges
  5. Back off screw to allow flanges to rejoin accurately
   
Technical Specification
Rated for DIN Flanges Style and Size – Range (mm) Weight
80-250 mm MECHANICAL – M16 - M24 1.5Kg
250-600 mm HYDRAULIC – M25 - M38 20Kg*
* Weight with Hand Pump
   
User Profile
Refineries Offshore Textile
Transportation Pharmaceutical Military
Manufacturing Petrochemical Utilities
Marine Repair Riggers Haz-Mat
Pipelines Food Processing Power Generation
Safety Departments Ship Building Pulp & Paper
Fire-Rescue Mining Railroads
   
   
   
Home | About Us | Products | E-Brochure | Enquiry | Contact Us | Site Map
Copyright © 2010 Navbharat Engineers.. All rights reserved. Designed & Developed by NEW AGE